Broward County Certificate of Competency 20-F-21966-X
Fence Installation & Repair in Roosevelt Gardens, FL
Fence Installation & Repair for homes in Roosevelt Gardens and the rest of Broward County. Free estimate.
Roosevelt Gardens sits inside the High-Velocity Hurricane Zone, the part of the Florida Building Code that covers Broward and Miami-Dade counties and sets the highest design wind pressures in the state. A fence is not an opening in the house, but it is still a structure that has to stand up to those wind loads, and spring storms and hurricanes routinely topple wood and vinyl fence sections across Broward. Panels, posts, post spacing, footings and gate hardware all have to be chosen with that in mind rather than copied from a generic catalog detail.
Cat 5 Home Shield installs and repairs privacy, pool and decorative fences in wood, vinyl, aluminum and chain link, along with driveway and walk gates. We hold Broward County Certificate of Competency 20-F-21966-X, which covers fence work, and we work in Broward County only. We'll look at the yard, talk through height, line and gate swing, handle the permit application with your survey when the work needs one, schedule the inspection and see the permit closed out. Estimates are free.
This is an older, historically African American unincorporated pocket of central Broward County, where most houses are modest one-story concrete block homes built largely from the 1940s through the 1960s, often with an original carport or a small addition instead of a two-car garage. Much of that housing predates modern wind codes, and so does a lot of the fencing around it: decades-old steel gates, chain link and carport-adjacent posts corrode quickly in humid, salt-tinged air that drifts inland from the Atlantic a few miles east. Formal HOAs and gated communities are uncommon here, which usually simplifies approvals, but it also means old fence lines were sometimes set by habit rather than by survey — worth confirming before new posts go in.
Problems to watch for in Roosevelt Gardens
Wind load on solid panels
A solid wood or vinyl privacy fence catches wind like a sail, and HVHZ design pressures in Broward are the highest in Florida. Post size, embedment depth and panel attachment matter more here than the fence material itself.
Rust on gates and hardware
Constant humidity plus salt-laden air moving in from the coast corrodes gate hinges, latches, chain link fittings and old steel posts. Hardware often fails before the fabric or panels do.
Wood rot and termites
Year-round moisture and a May-through-October rainy season are hard on wood fencing, especially where posts meet soil. Soft, punky posts at grade are usually the reason a line starts leaning.
Pool barrier gaps
Florida Building Code pool barrier rules and Florida's residential pool safety law address barrier height, no-climb spacing, and gates that are self-closing, self-latching and swing outward away from the pool. Older yards frequently have a gate that no longer closes and latches on its own.
Height and setback surprises
Height limits and setbacks differ by yard — front, side and corner lots are not treated the same — and zoning review also looks at easements and corner visibility. Verify the limits for your parcel with the building and zoning authority before buying material.
Fences set on the wrong line
A survey is often requested with the permit application for new fences and walls, and in this older neighborhood existing lines don't always match the plat. Resolving it on paper first is cheaper than moving posts later.
Storm damage to a few sections
After severe thunderstorms or a tropical system, damage is often limited to several panels or one gate. Partial repair is sometimes possible, though substantial replacement typically needs a permit.
What we do
- Privacy, pool and decorative fencingWood, vinyl, aluminum and chain link, specified for Broward's HVHZ wind loads. Where a fence serves as a pool barrier, we build to the height, no-climb spacing and gate rules in the Florida Building Code and Florida's pool safety law.
- Driveway and walk gatesGates take the most abuse from wind and humidity, so we size posts and frames accordingly and use hardware suited to salt-tinged, high-moisture air. Pool gates get self-closing, self-latching hardware that opens outward away from the water.
- Repairs and partial replacementLeaning or rotted posts, storm-damaged panels, sagging gates, rusted chain link fittings and failed latches. We'll tell you plainly when a repair makes sense and when a run is better replaced.
- Permit application with surveyWe prepare and submit the permit package, including your survey when one is requested, and coordinate zoning review for height, setbacks and easements.
- Inspection and close-outWe schedule the final inspection and follow the permit through to close-out, so the work doesn't sit open against the property.
- Product approval documentationProducts such as aluminum or vinyl fencing may require Florida Product Approval or a Miami-Dade NOA in the HVHZ. We supply the approval paperwork that goes with the permit.
Permits, codes and licensing in Roosevelt Gardens
Florida does not issue a statewide fence contractor license as a standard CILB classification; fence installation is most often licensed or registered at the county or municipal level, and larger or structural work such as masonry walls may require a state-licensed contractor. Contractor qualification in Broward runs through the Broward County Central Examining Boards, with the Florida Department of Business and Professional Regulation (DBPR) and its Construction Industry Licensing Board at the state level, and code administration overseen by the Broward County Board of Rules and Appeals. Cat 5 Home Shield holds Broward County Certificate of Competency 20-F-21966-X for fence work. A permit is typically required for new fences and walls and for substantial replacement, with zoning review for height, setbacks, corner visibility and location relative to easements and property lines; permits come from the municipal building and zoning department, or from Broward County Building Code Services in unincorporated areas. Roosevelt Gardens is an unincorporated neighborhood, so confirm which office handles your parcel — verify with the city's building department or Broward County Building Code Services before applying.
Fence Installation & Repair work is done under Broward County Certificate of Competency 20-F-21966-X.
When to call
Fence work runs year-round here, but it is easiest during the November–April dry season, when the ground isn't saturated and afternoon storms aren't interrupting post setting. Demand rises in spring and again after hurricanes and severe thunderstorms, and hurricane season runs June 1 through November 30 — if you want a new line or a gate rebuilt before then, starting early leaves room for permit review and the survey. Call (954) 906-1715 or request a quote with the form on this page for a free estimate.
We work in Roosevelt Gardens and nearby Broward areas including Washington Park, Boulevard Gardens, Franklin Park, Lauderdale Manors, Dorsey-Riverbend, Rock Island, Melrose Park, Broadview Park, Lauderdale Lakes, Lauderhill, and the Sunrise Boulevard and Oakland Park Boulevard corridors.
Fencing in Roosevelt Gardens: questions we hear
- Do I need a permit for a fence in Roosevelt Gardens?
- A permit is typically required for new fences and walls and for substantial replacement, along with zoning review for height, setbacks and easements. Because Roosevelt Gardens is unincorporated, the application may go to Broward County Building Code Services rather than a city office. Verify with the city's building department or Broward County Building Code Services for your specific address.
- Will you need my survey?
- A survey is often requested with the fence permit application, and it also settles where the property line actually runs. In older neighborhoods like this one, existing fence lines were not always set from a survey, so it's worth confirming before posts go in.
- Does the HVHZ apply to fences?
- Broward County is entirely within the High-Velocity Hurricane Zone, and Florida Building Code wind load design applies to fence and wall structures under HVHZ provisions. Products such as aluminum or vinyl fencing may also require Florida Product Approval or a Miami-Dade NOA. That affects post size, spacing, footings and panel attachment.
- What are the rules for a fence around a pool?
- Pool barrier requirements under the Florida Building Code and Florida's residential pool safety law cover barrier height, no-climb spacing, and gates that are self-closing, self-latching and open outward away from the pool. We build pool-barrier fencing and gates to those requirements and include them in the permit and final inspection.
- Does a new fence count toward my wind-mitigation insurance discount?
- Florida law requires insurers to offer discounts or credits for wind-loss-mitigation features (s. 627.0629, Florida Statutes), and a licensed inspector records those features on form OIR-B1-1802 — building code, roof covering, roof deck attachment, roof-to-wall attachment, roof geometry, secondary water resistance and opening protection. Fencing is not one of those categories. If you want to see what does count on your home, try the free Wind Mitigation Credit Checker on this site.
Get a free fencing estimate in Roosevelt Gardens
Tell us what's going on. We'll get back to you to set up a visit.
Prefer to talk?
(954) 906-1715